Answers are grounded in this paper and cite their sources.
A wideband printed ridge gap waveguide 4x4 Butler matrix at 30 GHz is presented. The printed ridge gap technology is used as it has very low losses and supports the propagation of quasi-TEM mode. Each component of the Butler matrix has been designed and analyzed where a superior performance is achieved in terms of bandwidth and size. The designed components are combined to form the Butler matrix. The Butler matrix has a wideband performance where the return loss and isolation levels are higher than 10 dB in the frequency range from 26.9 to 33.3 GHz, the output amplitude imbalance is ±1.6 dB, and the phase error is ±10°. The measured radiation patterns are in a good agreement with the simulated ones, beam directions are at ±13° and ±36° at the center frequency. The gain is ranging from 10.2 to 11.35 dBi for excitation from port 1 and ranging from 8.4 to 10.2 dBi for excitation from port 2.
No takes yet. Share an insight, caveat, or question.
Afifi et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: