Answers are grounded in this paper and cite their sources.
This study investigated the effect of synthesis temperature (550 to 1050 °C) on the performance of Magnéli phase titanium suboxide electrodes for electrochemical nitrate (NO 3 – ) reduction. Different synthesis temperatures produced distinct Magnéli phases, which were characterized using X-ray diffraction and X-ray photoelectron spectroscopy. Higher temperatures increased oxygen vacancy and Ti 3+ concentrations. The electrode synthesized at 850 °C consisted of a mixed Magnéli phase with predominant Ti 9 O 17 structure and demonstrated the highest NO 3 – removal (∼60%) and low nitrite selectivity (∼2.8%) at −0.8 V/SHE with an 8.3 s hydraulic residence time (pH ∼8). This electrode achieved a Faradaic efficiency of 72% for ammonia production at −1.4 V/SHE with 100 mM NO 3 – concentration. The pseudo-first-order rate constant (172 h –1 ) exceeded those of other nonprecious and precious metal electrodes, attributed to the high specific surface area per volume (∼1.3 × 10 6 m –1 ) and efficient mass transfer enabled by the flow-through reactor design. Superior performance was attributed to optimized electronic properties, including band gap (1.31 eV) and flat band potential (−1.10 V/SHE), which facilitated efficient electron transfer at the electrode/electrolyte interface. These results underscore the critical role of synthesis temperature in tuning the electrochemical properties of Magnéli phase electrodes, providing insights for developing efficient, nonprecious-metal-based electrodes for nitrate remediation.
No takes yet. Share an insight, caveat, or question.
Nadeali et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: