Answers are grounded in this paper and cite their sources.
Experimental study demonstrates temperature-dependent wear transitions in Al-7075/TiO2 composites, suggesting computational optimisation for high-temperature engineering applications.
Aluminium-based metal matrix composites (MMCs) are widely used in high-temperature engineering applications, yet their tribological performance under varying thermal and mechanical conditions remains inadequately understood. This study investigates the high-temperature dry sliding behaviour of stir-cast Al-7075/TiO 2 composites and integrates artificial neural network (ANN) modelling with improved grey wolf optimiser (I-GWO)-based multi-objective optimisation. Tribological experiments were conducted over a temperature range of 50–250°C, sliding speeds of 0.94–2.20 m s⁻ 1 , normal loads of 20–60 N, and TiO 2 reinforcement contents of 2–10 wt% to evaluate the specific wear rate (SWR) and coefficient of friction (COF). The experimental results revealed distinct temperature-dependent wear transitions. Mild abrasive wear dominated at temperatures below 100°C for composites containing 2–4 wt% TiO 2 , whereas mixed abrasive–adhesive wear became predominant between 150 and 250°C. Severe adhesive–abrasive wear accompanied by matrix softening and particle pull-out was observed at 250°C under higher loads and TiO 2 contents ≥ 8 wt%. ANN models with selected architectures of 4–9-6–1 and 4–10-6–1 were employed as surrogate interpolation models to represent the nonlinear relationships between the process parameters and tribological responses within the investigated experimental domain. The ANN-assisted I-GWO analysis computationally identified candidate operating conditions within the investigated design space, with controlled temperatures and moderate TiO 2 contents showing potentially favourable model-estimated trade-offs between wear and friction. The Pareto-optimal solutions illustrate the trade-off between SWR and COF and provide computational guidance for selecting candidate operating conditions for subsequent experimental assessment. The combined experimental, ANN-based surrogate modelling, and I-GWO analysis approach provides a framework for interpreting the tribological behaviour of Al-7075/TiO 2 composites and identifying candidate conditions for subsequent experimental assessment.
No takes yet. Share an insight, caveat, or question.
Ahmad et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: