Answers are grounded in this paper and cite their sources.
To improve the use of natural rutile ore with fine particle size and high contents of MgO and CaO in China, a novel pre‐treatment method of natural rutile ore by NaOH roasting to prepare α ‐Na 2 TiO 3 for TiO 2 production was proposed. γ ‐Na 2 TiO 3 is a stable by‐product that can lead to serious caking in the reactor and low titanium yield. Thus, structural control in alkali roasting is necessary. The influence of particle size of natural rutile ore, NaOH‐to‐ore mass ratio, roasting temperature and roasting time on the crystal forms of Na 2 TiO 3 was systematically investigated. The optimized reaction parameters were as follows: average particle size of natural rutile ore, −9.2 µm; NaOH‐to‐rutile mass ratio, 1.2; roasting temperature, 550 °C; and roasting time, 70 min. In these conditions, the titanium conversion and the fraction of α ‐Na 2 TiO 3 exceeded 99.5 % and 98 %, respectively. Moreover, the addition of H 2 O or as‐prepared partial α ‐Na 2 TiO 3 as crystal seeds into the reaction system could prepare the roasting product with α ‐Na 2 TiO 3 as its main phase using −45 µm (−325 mesh) natural rutile ore.
No takes yet. Share an insight, caveat, or question.
Meng et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: