This is the authors' abstract. We don't add key points for this paper.
In this paper, a compact wideband high-rejection microstrip bandstop filter using two meandered parallel-coupled lines of different electrical lengths and characteristic impedances in shunt is presented.The transmission and reflection zeros of the filter can be controlled through analytical equations and rulers given.Using this signal interferences technology, this filter obtains a low insertion loss and sharp rejection.Bandwidth and rejection level of the filters of this bandstop filter can be designed by choosing different even-and oddmode characteristic impedances values of the coupled lines.According to the transmission zeros number, two types of filters are shown in the paper.To validated this topology, a wideband bandstop filter with a 3 dB cutoff frequency bandwidth of 92% centered at 2.6 GHz with sharp rejection characteristics is built to verify the theoretical prediction.The measured frequency response of the filter agrees excellently with the predicted result. INTRODUCTIONWith the rapid development of modern wireless systems, compact size, low losses, high selectivity, low cost, and high performance components are the design goals.Filter is an essential component in modern communication system.In response to this need, recently many planar filters with band-pass, low-pass, or band-stop performances have received wide attention [1-7], and many techniques and methodologies used to realize the goals have been investigated.Bandstop filter (BSF) is one of the key components in modern communication system.It plays a major role of filtering out undesired frequencies and passing the desired signal.Most conventional
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Cui et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: