Answers are grounded in this paper and cite their sources.
This paper discusses the various types of drying agents and their different modes of functioning.The method employed for determining the comparative efficien- cies of the more common commercial drying agents as well as some newer drying materials recently introduced, was to aspirate properly conditioned air through a train of U -tubes containing the drying materials in the order of their increasing drying powers.After a measured amount of air had passed through the system, the increase in the weights of the U -tubes following any one U-tube indicated the residual water escaping that tube.The materials studied (with the amount of residual water in milligrams per liter of air dried), in the order of increasing efficiency at 30 C, follow: CuS0 4 (anhydrous) (2.8); CaCl 2 (granular) (1.5); CaCl 2 ("Technical anhydrous") (1.25); ZnCl 2 (sticks) (0.98); Ba (C104 ) 2 (0.82); NaOH (sticks) (0.80); CaCl 2 (granular) (dehydrated) (0.36); Mg (C104 ) 2 .3H 2 (0.031); Silica Gel (0.030); KOH (sticks) (0.014); A1 2 3 (0.005); CaS0 4 (anhy- drous) (0.005); CaO (0.003); Mg (C10 4) 2 (0.002); BaO (0.00065).CONTENTS Page I. Introduction 241 II.Classification of agents 241 A. Class 1 241 B. Class 2 242 C. Class 3 242 D. Class 4 242 E. Class 5 243 III.Method employed 243 IV. Materials used 244 V. Arrangement of materials and results of tests 245 VI. Discussion of results 246 VII.
No takes yet. Share an insight, caveat, or question.
J.H. Bower (1934) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: