Answers are grounded in this paper and cite their sources.
The Cu/Ni Schottky contact on n-InP substrate was fabricated with e-beam evaporation system in order to measure the modified interface state densities and series resistance. The Schottky barrier height, ideality factor and series resistance of the investigated diode were founded to be 0.81 eV, 1.02 and 21 M respectively at room temperature. I-V parameter was mainly used and the same parameters were determined by performing Cheung and Norde plots. It is evaluated that the series resistance value should be taken into account in determining the interface state density distribution. The founded N SS value is of the order of 1.852 x10 13 eV -1 cm -2 from the forward bias I-V characteristics. This paper describes the detail results of the Cu/Ni Schottky contact formation of thin interfacial layer between the metal and semiconductor at room temperature.
No takes yet. Share an insight, caveat, or question.
Nagaraj et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: