Answers are grounded in this paper and cite their sources.
The cadmium sulfide (CdS) nanopowders have been prepared by ball-milling method, and CdS-polyvinyl alcohol (PVA) nanocompound in the form of film has been deposited on a p-Si wafer as an interfacial layer by spin-coating method. The impedance characteristics of the fabricated Al/CdS-PVA/ p-Si (metal-polymer-semiconductor)-type structures were studied in the frequency and voltage range of 5 kHz-5 MHz and ±1 V, respectively, by considering interface states (Dit), series resistance (Rs), and interfacial layer effects at 300 K. While the voltage and frequency dependence profiles of Ditwere evaluated from the low-high frequency capacitance (CLF-CHF) and Hill-Coleman methods, Rsprofiles were evaluated from the Nicollian and Brews method. Doping concentration atoms (NA) and barrier height [ΦB(capacitance-voltage (C-V))] values were also obtained from the reverse bias C-2 versus V plots for each frequency. While Ditand Rsvalues decrease with increasing frequency almost exponentially, ΦB(C-V) increases linearly. Therefore, both the measured capacitance (Cm) and conductance (Gm/w) values were corrected to eliminate the Rseffect. The experimental results show that Rsvalue is more effective on the impedance measurements at high frequencies in the accumulation region, but Ditis effective at low frequencies in the depletion region.
No takes yet. Share an insight, caveat, or question.
Ersöz et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: