Answers are grounded in this paper and cite their sources.
An instrument for the reproducible measurement of polymerization shrinkage kinetics is described, constructed around a disc-shaped specimen sandwiched between two glass plates. Test specimens of light-activated resins were irradiated through the lower, rigid plate. The physical response of this measurement system, in relation to the characteristics of photo-polymerized materials, has been subject to an original detailed analysis and validation. The upper non-rigid plate was readily deflected by an increase of the adhesive stress from the polymerizing and shrinking sample. Deflection was measured by a LVDT transducer and computer recorded. Dimensional changes were confined to the specimen disc-thickness dimension, such that the fractional linear shrinkage approximated the volumetric shrinkage. Shrinkage data are reported for representative unfilled and composite resins. Equilibrium shrinkage magnitudes ranged from 1.3 to 7.9%. The kinetic behaviour was approximately characterized by an overall time constant, ranging from 12.5-27 s, associated with an exponential growth curve, although the initial shrinkage was nearly linear in time, for many materials, due to non-steady-state concentrations of polymer free radicals.
No takes yet. Share an insight, caveat, or question.
Watts et al. (1991) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: