Answers are grounded in this paper and cite their sources.
Knowledge of the influence of bending on the critical current ( I c ) of Nb 3 Sn strands is essential for the understanding of the reduction in performance due to transverse electromagnetic load. In particular, for the large cable-in-conduit conductors (CICCs) meant for the international thermonuclear experimental reactor (ITER), we expect that bending is the dominant mechanism for this degradation. We have measured the I c of a bronze, a powder-in-tube and an internal tin processed Nb 3 Sn strand when subjected to spatial periodic bending using bending wavelengths from 5 to 10 mm. Two of these strands were applied in model coils for the ITER. We found that the tested strands behave according to the so-called low interfilament resistivity limit, confirming full current transfer between the filaments. This is supported by AC coupling loss measurements giving an indication of the interfilament current transfer length. The reduction of I c due to bending strain can then be simply derived from the bending amplitude and the I c versus axial applied strain (ε) relation. This I c (ε) sensitivity can vary for different strand types but since the electromagnetic force is the driving parameter for strand bending in a CICC, the stiffness of the strands definitively plays a key role, which is confirmed by the results presented.
No takes yet. Share an insight, caveat, or question.
Nijhuis et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: