This is the authors' abstract. We don't add key points for this paper.
The current research work investigated and compared the combustion dynamics of three different solid fuels, i.e. lignite coal, torrefied biomass, and raw biomass fuel under oxy-fuel conditions using a 100 kWth vertical pilot furnace. The research employs a Computational Fluid Dynamics (CFD) approach, integrating an Eulerian–Lagrangian framework to capture the interactions between gas-phase flow and solid fuel particles. The combustion behavior of above three different solid fuels was numerically solved using three widely recognized turbulence models, Standard k-ε, RNG k-ε, and realizable k-ε turbulence models. These simulations were rigorously validated against experimental data published by Toporov etal. (2008) to ensure accuracy and reliability. To account for the variability in fuel particle sizes, a Rosin–Rammler distribution was applied, which effectively characterized the particle diameter range from 0.90 µm to 123 µm, provides a realistic representation of the fuel’s physical properties. For radiative heat transfer, the Discrete Ordinates Model (DOM) was utilized in combination with the Weighted-Sum-of-Gray-Gases Model (WSGGM). This coupled methodology allowed for accurate modeling of radiation effects, which play a critical role in combustion processes. Additionally, the Finite Rate Eddy Dissipation Model (FR-EDM) was applied to simulate species transport and combustion kinetics. This comprehensive approach enabled a thorough combustion process analysis, integrating turbulence, radiation, and chemical kinetics to achieve a high-fidelity simulation. The comparative analysis of axial velocity, tangential velocity, temperature gradients, and oxygen mole fraction revealed that the realizable k-ε turbulence model closely aligned with experimental results. Axial velocity contours revealed peak near-burner velocities of 7.70 m/s for coal, 7.57 m/s for torrefied biomass, and 7.54 m/s for raw biomass, with the latter maintaining higher downstream velocities as a consequence of its relatively lower density. Temperature distributions confirmed biomass attaining the highest flame peak of 1720 K close to the burner region, whereas coal and torrefied biomass peaked at 1500 K and 1637 K, respectively. Oxygen mole fraction analysis demonstrated more complete utilization in coal combustion, with residual oxygen as low as 1.6%, compared to 9.7% for biomass along the axial position. Further results demonstrate that raw biomass ignites rapidly due to its high volatile content, while lignite coal sustains a longer and more stable combustion phase due to its higher fixed carbon proportion. Torrefied biomass exhibits moderate ignition properties, making it a viable alternative between the other two fuels. By bridging the gap between experimental combustion studies and numerical modeling, this work provides a valuable insight for optimizing oxy-fuel combustion for three different solid fuels. The findings support the transition toward cleaner and more efficient energy production, particularly in low-emission power plants utilizing biomass-based fuels.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Ahmed et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: