Answers are grounded in this paper and cite their sources.
Experimental study demonstrates increased droplet bouncing on non-wetting and roughened surfaces, suggesting surface modification improves liquid metal deposition quality.
In droplet-based manufacturing processes, such as dropwise rapid prototyping, solder bumping, and spray forming, the quality of the deposit is adversely affected by bouncing of liquid droplets off the target surfaces. This study investigates the effects of wetting and surface roughness on the bouncing phenomenon. An analytical model, based on the conservation of energy during deposition, was developed to correlate wetting and surface roughness to a dimensionless droplet bouncing potential. In addition, experiments were conducted to image the deposition behavior of Sn-37 wt % Pb solder droplets, averaging 280 μm in diameter, on prepared substrates with a wide range of wetting properties and roughness levels. The high-speed image data correlate well with the model prediction that droplets are likely to bounce as a target surface becomes less wetting or is roughened.
No takes yet. Share an insight, caveat, or question.
Hsiao et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: