Answers are grounded in this paper and cite their sources.
Al2O3films deposited by thermal and plasma-assisted atomic layer deposition (ALD) were evaluated as passivation layers for InAlN/AlN/GaN HEMTs. As a reference, a comparison was made with the more conventional plasma enhanced chemical vapor deposition deposited SiNxpassivation. The difference in sheet charge density, threshold voltage,f Tandf _ maxwas moderate for the three samples. The gate leakage current differed by several orders of magnitude, in favor of Al2O3passivation, regardless of the deposition method. Severe current slump was measured for the HEMT passivated by thermal ALD, whereas near-dispersion free operation was observed for the HEMT passivated by plasma-assisted ALD. This had a direct impact on the microwave output power. Large-signal measurements at 3 GHz revealed that HEMTs with Al2O3passivation exhibited 77% higher output power using plasma-assisted ALD compared with thermal ALD.
No takes yet. Share an insight, caveat, or question.
Malmros et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: