Answers are grounded in this paper and cite their sources.
This study focuses on developing a low-friction coating material using ternary medium entropy alloy using lead (Pb), tin (Sn), and copper (Cu). A Vajra Lep made of Pb-Sn-Cu system reported in Varah Mihir's Jyotish Granth " Brihat-Samhita " inspired this research. The reported alloy in the present study was fabricated via the open induction casting method. The microstructure and phase analysis were conducted using a scanning electron microscope and X-ray diffraction. It revealed that Pb-Sn, Pb-rich, and Cu-Sn stable phases are formed during open induction melting-casting. The average microhardness was measured to be 25.3 ± 13.61 HV, suitable for the coating material. The corrosion tests were performed in 3.5 wt% NaCl medium, which showed the formation of a stable passivation layer. I corr was determined to be 5.63 × 10 −7 A/cm 2 , confirming that the material has high corrosion resistance compared to SS316. The wear tests were carried out at different temperatures with a constant load of 10 N and sliding velocity of 314 mm/s. The wear rate was noted to be 5.623 × 10 −5 mm 3 /Nm at room temperature and decreased to 2.811 x 10 −5 mm 3 /Nm at 80 ℃, exhibiting comparable wear resistance with that of Babbitt alloys. Hence, the study is meaningful in designing the Pb-Sn-Cu based multicomponent alloy system as a coating material for various applications.
No takes yet. Share an insight, caveat, or question.
Singh et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: