Answers are grounded in this paper and cite their sources.
Conventional half bridge class-D audio amplifier (HB-CDAA) systems typically suffer from serious bus-voltage pumping. Such a bus-voltage pumping increases the device stress and deteriorates the total harmonic distortion and noise (THD+N) of HB-CDAA. To reduce the bus-voltage pumping of HB-CDAA system, large electrolytic capacitors are usually required at the input of downstream HB-CDAA, which seriously affects the power density of HB-CDAA system. In this article, an electrolytic capacitor-free HB-CDAA system without bus-voltage pumping is proposed, which consists of a front-end bipolar-symmetric-outputs (BSO) bidirectional dc-dc converter and a downstream HB-CDAA. By providing a bidirectional current flowing path in the front-end dc-dc converter, the bus-voltage pumping of the HB-CDAA system is eliminated without using large electrolytic capacitors. Zero voltage switching (ZVS) of all switches in the front-end BSO dc-dc converter can be achieved over the full audio load range. Compared with the HB-CDAA system with a unidirectional front-end dc-dc converter, the proposed audio amplifier system benefits from high power density, low-output voltage THD+N, and voltage stress of switches. The bus-voltage pumping problem is identified, the operation of the proposed HB-CDAA system is analyzed, and the design parameters of the converter are derived to ensure ZVS of all switches. Experimental results with a 40-W prototype of the proposed audio amplifier system are presented to verify the design.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: