Answers are grounded in this paper and cite their sources.
The present research investigates the phytofabrication of Zinc Oxide nanoparticles (ZnO NPs) using Eucalyptus globulus leaf extract to eliminate harmful Pb 2+ and Cd 2+ ions from aqueous solutions. The fabricated ZnO NPs were analysed by numerous characterization techniques, including FESEM, XRD, HRTEM, EDX, FTIR, UV–Vis spectroscopy, Zeta potential, DLS, and elemental mapping. The results confirm the formation of spherical nanoparticles with a size range from 44 to 58 nm. Batch studies were carried out to evaluate the performance and optimal conditions for the adsorption of Pb 2+ and Cd 2+ ions. For Pb²⁺, maximum efficiency was achieved at pH 5 using a 0.02 g adsorbent dose. In contrast, Cd²⁺ removal was most effective at a pH of 6 with a lower adsorbent mass of 0.01 g. Both metal ions reached optimal removal at an initial concentration of 30 ppm and a short contact time of 20 min. The experimental data fitted the pseudo-second order kinetic model with R 2 values of 0.918 and 0.997 for Pb 2+ and Cd 2+ ions, respectively, indicating a chemisorption process. The adsorption data aligned more closely with the Langmuir isotherm, with maximum monolayer adsorption capacities of 434.78 mg/g and 526.31 mg/g for Pb 2+ and Cd 2+ ions, respectively. The potential for reusing the nanoparticles was assessed using Na 2 EDTA, double-distilled water, HCl, and NaOH, and the findings suggested that ZnO NPs can be employed to remediate Pb 2+ and Cd 2+ ions. • ZnO NPs phytofabricated using E. globulus leaves for metal removal. • Adsorption followed pseudo-second-order kinetics and Langmuir isotherm for both metal ions. • ZnO NPs removed Pb²⁺ more efficiently than Cd²⁺ from E-waste wastewater. • FTIR and FESEM analyses validated the proposed adsorption mechanism.
No takes yet. Share an insight, caveat, or question.
Yadav et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: