Answers are grounded in this paper and cite their sources.
Energy-recycling electronic load requires high input current slew rate for the dynamic test. An inductor current step (ICS) control (nonlinear control) cooperating with input voltage feedforward (linear control) during the transient is proposed to realize fast input current step response. The ICS control pushes the inductor current and the duty cycle to the target quiescent point within minimum time. Starting from the target quiescent point, the linear control with input voltage feedforward takes over. The advantage of proposed control is that the ICS control is able to break the low bandwidth in DCM current loop with conventional control, significantly improving the input current slew rate. The input voltage feedforward compensates the input capacitance current diversion, further improving the transient response. The control advantage is verified in a 5-kW SiC DC electronic load. With the proposed control, the maximum current slew rate is increased from 32.9 A/ms to 699 A/ms, a significant increasement of 21.2 times compared to the conventional control. The settling time is decreased from 1.42 ms to 236 s, a significant reduction of 6 times, when the input current steps from 1-A to 24-A with 200-V input voltage.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: