This is the authors' abstract. We don't add key points for this paper.
The main purpose of this research work is to synthesize polypyrrole (PPy) and polypyrrole (PPy)-cadmium oxide (CdO) nanocomposites with different concentrations by using in-situ chemical polymerization method. Thin films of the synthesized composites were prepared by doctor blade method. The samples were characterized by XRD technique and four probe method to find the structure and electrical conductivity of the prepared (PPy-CdO) nanocomposites. The XRD of PPy shows amorphous nature due to single broad peak. XRD of pure CdO shows crystalline nature due to sharp peaks. In the XRD of (PPy-CdO) nanocomposites, sharp peaks are obtained which shows the crystalline nature of composites. As the concentration of CdO is increasing, the sharp peaks shift towards lower angles and d-spacing is increasing that may attribute to increase in crystallite size of nanocomposites. The DC electrical conductivity of nanocomposites was calculated by four- probe method at room temperature. Results reveal that by increasing the concentration of CdO in PPy, the conductivity of the nanocomposite is also increasing. Schottky diode characteristics were taken by two probe method. From the obtained I–V curves, it was concluded that only space charge limited current (SCLC) holds in our case at higher voltages which is suitable for Schottky diode applications.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Anwar et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: