Answers are grounded in this paper and cite their sources.
This brief presents an inductorlessgₘ-boosted wideband balun low noise amplifier (LNA) for low power sub-GHz IoT applications. The proposed common source (CS) - common gate (CG) basedgₘ-boosted balun LNA uses nMOS-pMOS configuration for doubling the transconductance and gain efficiency. Loads of CS and CG stages are capacitively coupled to remove the tradeoff between voltage gain and voltage headroom. In addition to this, the circuit employs noise cancelation using the CS-CG pair. The LNA is implemented in 0.18μ mRFCMOS process, which achieves a maximum voltage gain of 19.6 dB with a minimum noise figure (NF) of 3.6 dB. The 3-dB bandwidth ranges from 0.13 GHz to 0.93 GHz. The minimum IIP3 and IIP2 measured are −8.5 dBm and 12 dBm, respectively. The LNA core area is 0.18mm²and dissipates a total power of 3 mW from 1.8 V power supply.
No takes yet. Share an insight, caveat, or question.
Tiwari et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: