Answers are grounded in this paper and cite their sources.
Superconducting V3Ga tapes were produced by fabricating a composite of Cu–Ga alloy and a vanadium core and subsequent heat treatment at 625–-800°C. The critical current of these composite-processed (CP) V3Ga tapes was measured at 4.2 K in magnetic fields up to 210 kOe. In CP-V3Ga tapes, the pronounced ``peak effect'' appears at fields near 170 kOe where a critical-current density Jc of 1×105 A/cm2 is obtained. At the ``peak field'', Jc is nearly independent of the thickness d of the V3Ga layer. On the other hand, at low fields Jc decreases markedly with increasing thickness. When the Cu–Ga alloy matrix is supplemented by a small amount of manganese, the peak effect disappears consequently improving Jc at lower fields.
No takes yet. Share an insight, caveat, or question.
Tachikawa et al. (1973) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: