Answers are grounded in this paper and cite their sources.
A single-stage high-power-factor electronic ballast with a Class-E rectifier as a power-factor corrector is proposed. A Class-E rectifier is inserted between the front-end bridge rectifier and the bulk filter capacitor to increase the conduction angle of the bridge-rectifier diode current for obtaining low line-current harmonics. The Class-E rectifier is driven by a high-frequency sinusoidal current source, which is obtained from the square-wave output voltage of the Class-D inverter through an LC series resonant circuit. A high-frequency transformer is used for impedance matching. The experimental results for a 32-W prototype ballast are given. The switching frequency was 61.3 kHz. At full power, the power factor was 0.992 and the total ballast efficiency was 88.3%. The lamp-current crest factor was about 1.36. The simulated and experimental results were in very good agreement.
No takes yet. Share an insight, caveat, or question.
Jirasereeamornkul et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: