Answers are grounded in this paper and cite their sources.
Te-doped GaAs crystals were heat-treated under various arsenic vapor pressures, and the defects related to nonstoichiometry were studied. The acceptor density formed by heat treatment shows minimum at a certain arsenic vapor pressure ( P As, min ), and the relation between the annealing temperature ( T H ) and this arsenic vapor pressure P As, min is given as P As, min 2.6×10 6 exp {-1.05 eV/( k T H )} Torr. The density of acceptors related with defects, probably two sorts of acceptors generated at lower pressures and at higher pressures respectively, is at the same time in proportion to the concentration of the initial donor impurity (Te). Therefore complexes associated both with the donor impurity (Te) and with the defects due to the deviation from the stoichiometric composition are formed. These complexes are responsible for both the 0.18 eV acceptor level and the 1.30 eV emission band at 77 K. Furthermore defects with acceptor levels of 0.12 eV and 0.15 eV, are investigated. These defects are unstable and disappear by reannealing at comparatively low temperatures (300–400°C) leaving acceptor levels at 0.18 eV.
No takes yet. Share an insight, caveat, or question.
Nishizawa et al. (1974) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: