Answers are grounded in this paper and cite their sources.
In-situ synchrotron XRD study demonstrates localized deformation and failure in welded 304 stainless steel, highlighting structural vulnerabilities.
To enable the fabrication of complex structural components, this study investigates the post-weld microstructure and mechanical properties of wire arc additively manufactured (WAAMed) 304 stainless steel. The investigation employs both EBSD and in-situ synchrotron X-ray diffraction (SXRD) techniques. The research reveals grain size variations across the processed material (heat-affected zone (HAZ) vs fusion zone (FZ)), as well as differences in the kernel average misorientation (KAM) among the different regions that coexist in the material. During tensile deformation, the material underwent sequential martensitic transformation following the γ → ε → α′ sequence, with the FZ demonstrating greater elongation (approximately 64%). Strain accommodation is achieved through the synergistic interaction of dislocation slip and martensitic transformation. In-situ SXRD analysis reveals that during loading, the dislocation density increases to varying degrees across different regions (FZ, HAZ, and base metal (BM)), indicating the occurrence of coordinated deformation within the material. Ultimately, fracture occurs in the BM region under the combined effect of its high KAM value and the continuous increase in α′-martensite content under high local dislocation density.
No takes yet. Share an insight, caveat, or question.
Dong et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: