Answers are grounded in this paper and cite their sources.
This paper reports on the elastoplastic properties of additively manufactured specimens made of metamaterials based on the biocompatible titanium alloy Ti6Al4V, known as meta–biomaterials. The paper presents the results of experimental tests for three types of meta–biomaterials composed of beam–based Diamond unit cell and surface–based Gyroid and IWP unit cells, with 30, 50 and 70% volume fractions of solid material. The experimental tests were carried out for quasi–static tension and compression scenarios. The load–displacement curves obtained were used to evaluate Young’s modulus, yield strength and the parameters of the plastic response. We additionally built finite element models of the given metamaterials, performing numerical simulation of the obtained tensile specimens accounting for the mechanical properties of the additively manufactured titanium alloy. Analyzing the experimental and numerical test results, we established qualitatively similar behavior in both the elastic and plastic deformation regions, as well as different values for the effective elastic characteristics under tension and compression. The observed discrepancies between the numerical and experimental data can be attributed to printing defects in the metamaterials, induced by their complex internal structure and the specifics of the additive manufacturing process.
No takes yet. Share an insight, caveat, or question.
Maslov et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: