Answers are grounded in this paper and cite their sources.
This study reports on the in situ characterization of the deformation mechanisms at room temperature of polyamide 6 (PA6) fibers filled with hyperbranched molecules or montmorillonite (MMT) platelets. A small‐angle X‐ray scattering study shows that the stretching and sliding of the microfibrils takes place concomitantly in the first stage of elastic loading of as‐spun and partially drawn fibers. In the second stage of loading, which is basically plastic, sliding turns out to be the main process of deformation, accompanied by a significant reduction in the microfibril radius. Fibers drawn close to their maximum draw ratio only display the deformation process of microfibril stretching. This in situ study also reveals subtle features of the reversible processes of deformation that could not be detected from ex situ experiments reported previously. A thickening of the crystal blocks in the microfibrils takes place under stress and disappears upon unloading, indicating that some reversible strain‐induced molecular ordering occurs in the amorphous layers close to the crystal surface. The tentative mechanical modeling enabled a characterization of the components of the fibers: the stiffness of the microfibrils appears to be insensitive to the presence of the particles that are excluded in the interfibrillar regions. The presence of HB molecules clearly increases the stiffness of the interfibrillar regions owing to a physical crosslinking effect. Moreover, it seems that the stiffness improvement of the drawn MMT‐PA6 fiber lies in a greater capability of chain unfolding in the interfibrillar amorphous region.
No takes yet. Share an insight, caveat, or question.
Ibanes et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: