Answers are grounded in this paper and cite their sources.
This paper investigates microstructural changes in proton-conducting solid oxide fuel cells (SOFCs) after electrolysis-mode start-up/reduction conditions, with emphasis on the anode/fuel-electrode structure affected by NiO-to-Ni reduction during electrolysis-mode start-up. The experiment was performed using in situ nano-scale X-ray computed tomography (nano-XCT). The sample was heated at 5°C min −1 to 750°C and imaged every 10 min; hydrogen was subsequently introduced stepwise, reaching 6 mL min −1 , corresponding to 40% of the nominal hydrogen flow. The study provides quantitative evidence of transport-relevant microstructural features in proton-conducting SOFCs and may support future efforts aimed at improving their reliability, optimization, and practical implementation in sustainable hydrogen-energy systems. Across the three reconstructed volumes, corresponding to two exposed specimens and one unexposed reference, average porosity ranged from 49% to 64%. The average geometrical tortuosity ranged from approximately 1.29 to 1.34, while the median tortuosity varied from approximately 1.14 to 1.18. These results indicate that start-up/reduction-related microstructural evolution is associated with measurable differences in electrode pore volume, whereas the pore-network tortuosity remains within a relatively limited range. Quantitative nano-XCT analysis therefore provides useful insight into the relationship between start-up conditions and material parameters relevant to gas transport in reversible proton-conducting SOFCs.
No takes yet. Share an insight, caveat, or question.
Milewski et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: