Answers are grounded in this paper and cite their sources.
Selective coextraction and recovery of Co and Ni from magnesium-rich sulfate solutions remain highly challenging due to the closely similar physicochemical properties of Co2+, Ni2+, and Mg2+. In this work, gemfibrozil (GEM) was employed as an extractant for the selective coextraction of Co2+ and Ni2+, enabling their efficient separation from Mg2+/Ca2+-containing solutions. The extraction behavior was systematically investigated, revealing that the separation performance was strongly influenced by the saponification degree, initial feed pH, extraction time, and Mg2+/(Co2+ + Ni2+) concentration ratio, with maximum separation factors of SFCo/Mg = 117.5 and SFNi/Mg = 172.7. The GEM system also exhibited excellent extraction-stripping cyclic stability, with Co2+ and Ni2+ loading capacities of 8.59 g/L and 8.99 g/L, respectively. Under optimized conditions, a counter-current extraction process consisting of three extraction stages, six scrubbing stages, and two stripping stages was established, producing a strip liquor with a total Co2+ + Ni2+ concentration of 18.5 g/L. The process increased the purity of Co2+ + Ni2+ from 12.5 wt % to 98.1 wt % and achieved an enrichment factor of more than nine compared with the initial feed solution. Mechanistic studies based on slope analysis and FT-IR spectroscopy revealed that the extraction of Co2+ and Ni2+ by saponified GEM proceeds primarily via a cation-exchange mechanism. This work provides an effective strategy for the selective recovery of cobalt and nickel from Mg-rich solutions and offers new insights into the design of separation systems for energy-critical metals in complex resources.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: