Answers are grounded in this paper and cite their sources.
Resonant-cavity techniques provide a powerful method for evaluating circular-electric-mode waveguide performance, particularly attenuation, mode conversion and bend-loss characteristics. The waveguide to be tested forms the side wall of the resonator. Thus, a few samples of special waveguide may be sufficient to check design parameters.Cavity measuring equipment operating at frequencies between 50 and 60 Gc/s has been designed and used to study 7/16 in, 7/8 in and 2 in-inner-diameter copper, helix and dielectric-lined waveguide. Q-factors as high as 3.5×106 have been measured for a 30 ft-long 2in-diameter copper cavity at room temperature.Attenuation characteristics are obtained by measuring several cavities of different lengths to obtain end-wall and coupling corrections.A pure-mode coupler is used to excite the cavity, allowing mode-conversion effects caused by power transferred from the circular electric to other modes generated by side-wall imperfections to be measured when both modes are resonant simultaneously.
No takes yet. Share an insight, caveat, or question.
J. A. Young (1959) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: