Answers are grounded in this paper and cite their sources.
Prevulcanized natural rubber latex (PVNR) and acrylic emulsion (AR) blends for coating applications were prepared. The influence of blend proportions (30%, 40%, 50%, 60% or 70% AR) on morphological, tensile, adhesion and thermal properties were investigated. The morphology of the blends changed from PVNR continuous matrix type to a rubber particle dispersion when the AR fraction was increased. The greatest increases in tensile strength were achieved with 70% AR, for which partial compatibility between the phases may be occurred. The contact angle test revealed that wettability of the blend increased with AR proportion. This resulted in improved adhesion of the blends on substrates as confirmed by work of adhesion and peeling tests. The greatest peeling forces on wood and metal substrates were achieved at 70% AR, with respective improvements by about 470% and 84% over plain PVNR. Thermogravimetric analysis showed a single derivative degradation peak in the 70% AR sample while others displayed two degradation derivative peaks. Fourier transform infrared spectroscopy suggested possible interactions between the phases involving proteins in the PVNR particles and carbonyl groups of the AR. The results suggest that the PVNR/AR blends may find applications in wood and steel coating, and in adhesive products.
No takes yet. Share an insight, caveat, or question.
Hayeemasae et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: