Answers are grounded in this paper and cite their sources.
A study of original iron–potassium catalysts of ethylbenzene (EB) dehydrogenation to styrene and industrially used catalysts: Cat-1 (imported), Cat-2 and Cat-3 (domestic) is performed. Initial samples are multiphase systems consisting of potassium ferrites, hematite, and cerianite (CeO2). The phase composition of the catalysts after two years of operation consists mainly of magnetite and cerianite, while the amount of potassium (K+) in Cat-1, Cat-2, and Cat-3 samples falls by 40, 20, and 26%, respectively. At the same time, K+ for the Cat-2 sample is distributed uniformly in granules of the waste catalyst. XRD data indicate the CSR size of its CeO2 crystals does not change appreciably. The CSR size of CeO2 crystals in the Cat-3 sample falls from 302 to 110 Å, while it grows from 284 to 419 Å in the Cat-1 sample. After two years of operation, the greatest conversion of EB (72.1%) was observed for the Cat-2 sample, and it fell from 72.3 to 57.4% on the Cat-3 sample. There is a 600–1100% drop in the waste samples’ resistance to crushing, making them unsuitable for further use.
No takes yet. Share an insight, caveat, or question.
Nabiullin et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: