Answers are grounded in this paper and cite their sources.
We report on the generation of a femtosecond pulse in a fiber ring laser by using a polyvinyl alcohol (PVA)-based molybdenum disulfide (MoS(2)) saturable absorber (SA). With a saturable optical intensity of 34 MW/cm(2) and a modulation depth of ∼4.3%, the PVA-based MoS(2) SA had been employed with an erbium-doped fiber ring laser as a mode locker. The mode-locking operation could be achieved at a low pump threshold of 22 mW. A ∼710 fs pulse centered at 1569.5 nm wavelength with a repetition rate of 12.09 MHz had been achieved with proper cavity dispersion. With the variation of net cavity dispersion, output pulses with durations from 0.71 to 1.46 ps were obtained. The achievement of a femtosecond pulse at 1.55 μm waveband demonstrates the broadband saturable absorption of MoS(2), and also indicates that the filmy PVA-based MoS(2) SA is indeed a good candidate for an ultrafast saturable absorption device.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: