Answers are grounded in this paper and cite their sources.
We demonstrate a new type of optical saturable absorber based on the self-assembled topological insulator Bi2Se3membrane fabricated by the drop-cast/evaporation approach. The strong viscosity of Bi2Se3allows its attachment onto the optical fiber end-facet for practical optoelectronic applications. The balanced twin-detector technique was used to characterize the saturable absorption parameters of the device, which has a saturating intensity of 101.8 MW/cm2and a modulation depth of 41.2% at the telecommunication band. By deploying this device into a fiber laser cavity, we had achieved stable Q-switched pulses with a repetition rate of 8 kHz and pulse duration of 14 μs. Through fine tuning the laser pump strength and/or cavity birefringence, we could widely change the Q-switched pulse repetition rate from 4.508 kHz to 12.88 kHz, pulse duration from 13.4 μs to 36 μs, and lasing wavelength from 1545.0 nm to 1565.1 nm. A dual-wavelength passive Q-switching operation was also obtained by enhancing the intra-cavity birefringence. Our results show the effectiveness of developing Bi2Se3optical saturable absorber device by the drop-cast/evaporation method and applications for pulsed laser operation.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: