Answers are grounded in this paper and cite their sources.
This paper deals with the concept of quality engineering and robust design as one of the new practical methods for the improvement of galvanizing parameters design in order to obtain the best mechanical properties (hardness) by experimental design and robust design tools. By using Taguchi parameter design, three factors (controllable factors) were chosen, which are temperature, time, and withdraw speed, along with three levels for each factor to determine their effect on the hardness in galvanizing steel in order to obtain better quality levels. A L27(33) orthogonal array was selected and used in this experiment. Minitab software was used in design and data analysis to achieve the desired quality objectives. Results show that the best combination to achieve a desired hardness were (T=455 ˚C, t=4 min., and S=6 m/min ). The experiment also revealed that the temperature and time have the largest effect on the hardness. In addition, the optimum condition was verified during the optimization stage using central composite design.
No takes yet. Share an insight, caveat, or question.
Dalef et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: