Answers are grounded in this paper and cite their sources.
Polycrystalline gallium nitride films were successfully deposited on fused silica substrates by ablating a GaN target using pulsed Nd-YAG laser. Microstructural studies indicated an increase in the average crystallite size from ~8 nm to ~70 nm with the increase in substrate temperature from 300 K to 873 K during deposition. The films deposited here were nearly stoichiometric. XPS studies indicated two strong peaks located at ~1116.6 eV and ~395 eV for Ga2p3/2 and a N1s core-level peak, respectively. The films deposited at substrate temperature above 573 K are predominantly zinc blende in nature. PL spectra of the films deposited at higher temperatures were dominated by a strong peak at ~3.2 eV. FTIR spectra indicated a strong and broad absorption peak centered ~520 cm−1 with two shoulders at ~570 cm−1 and 584 cm−1. Characteristic Raman peak at ~531 cm−1 for the A1(TO) mode is observed for all the films. Grain boundary trap states varied between 3.1×1015 and 7×1015 m−2, while barrier height at the grain boundaries varied between 12.4 meV and 37.14 meV. Stress in the films decreased with the increase in substrate temperature.
No takes yet. Share an insight, caveat, or question.
Ghosh et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: