Answers are grounded in this paper and cite their sources.
Although semitendinosus-gracilis (SG) grafts for anterior cruciate ligament reconstruction have many potential benefits, effective fixation remains a challenge. This study assessed differences between the maximum pullout forces needed to detach a quadrupled SG graft from a femoral tunnel when secured by either a metal or a bioabsorbable interference screw. Sixteen paired fresh frozen quadrupled SG autografts (x, 8.4 mm; range, 7-10 mm) from 8 donors were anchored into cadaveric femoral tunnels by either a 7-mm metal or a 7-mm bioabsorbable screw after bone mineral density (BMD) assessment and before undergoing a longitudinal 20 mm/min traction force. Statistical analysis compared BMD (gm/cm2), insertional torque (N-m), and maximum load at pullout (N) between screw types. Insertional torques (.28-1.21, N-m range) did not correlate (P>.05) to BMD or maximum load at pullout (x +/- S.D.) 242 +/- 90.7 N (metal screw) and 341.1 +/- 162.9 N (bioabsorbable screw). Differences did not exist between the maximum load at pullout for bioabsorbable or metal screw fixation (P = .16). Careful graft preparation, sizing, and matched tunnel placement enables interference fit and fixation capable of reliably withstanding the low-level rehabilitation loads to which the graft is exposed until bony ingrowth occurs.
No takes yet. Share an insight, caveat, or question.
Coen et al. (1998) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: