Answers are grounded in this paper and cite their sources.
In this study, the mechanical behavior of high-density polyethylene (HDPE) reinforced with short natural fibers was evaluated using a dedicated test bench designed to investigate the high-cycle bending fatigue of gear teeth. Single-tooth bending tests were performed under displacement-controlled loading, employing high-resolution imaging to monitor crack initiation and propagation relative to the number of cycles. Quasi-static tests revealed a significant increase in structural tooth stiffness with increasing fiber content, accompanied by a reduction in maximum displacement. Fatigue performance was analyzed using S–N (stress–life) curves, damage indices, and linearized Weibull distributions. The results show that fiber reinforcement significantly increases structural tooth stiffness and reduces deformation; consequently, these composites sustain higher relative displacement levels than unreinforced HDPE. However, Weibull analysis indicates that this stiffness enhancement does not systematically translate into improved fatigue life. Crack propagation and residual load evolution exhibit consistent trends, reflecting progressive material damage. This work highlights a trade-off between stiffness and fatigue resistance in short natural fiber-reinforced HDPE gears, offering critical insights for design under cyclic loading conditions.
No takes yet. Share an insight, caveat, or question.
Blais et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: