Answers are grounded in this paper and cite their sources.
Sorbent‐based atmospheric water harvesting can expand freshwater access beyond conventional infrastructure, but practical deployment is still constrained by sorbents that require high regeneration temperatures, cycle slowly, or underperform at low relative humidity. Here, a bulk chemical‐activation route builds pore structure and heteroatom functionality into phenolic‐ and urea‐derived carbons, incorporating potassium hydroxide during polycondensation rather than as a secondary grafting step onto the produced porous carbon. Phloroglucinol‐formaldehyde (PhlF), urea‐formaldehyde (UF), and urea‐surface‐treated resorcinol‐formaldehyde (UC) sorbents were activated and characterized by nitrogen physisorption, XPS, water‐vapor isotherms, and dynamic gravimetric sorption. The urea‐formaldehyde carbon activated at 600°C (UF600) was the standout: it combined a 1337 m 2 g −1 BET surface area and 11% mesoporosity with the highest surface heteroatom loading (22 at%), with 12 at% oxygen and roughly 10 at% nitrogen, dominated by hydrogen‐bonding pyrrolic and pyridinic species. At desorption condition of 30°C and 5% RH, UF600 produced material‐level daily water yields of 18 L kg − 1 day − 1 at 20% RH and 24 L kg − 1 day − 1 at 30% RH, with no measurable capacity loss over ≈150 h of cycling. These results establish heteroatom‐engineered porous carbons, built from low‐cost, widely available precursors, as a platform for fast and durable atmospheric water harvesting.
No takes yet. Share an insight, caveat, or question.
Alavitabari et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: