Answers are grounded in this paper and cite their sources.
N-type tunnel-oxide passivated contact (TOPCon) cell technology currently accounts for over 60 % of the PV market. Yet, its aluminium-rich front metallisation remains vulnerable to humidity-driven corrosion in glass/back-sheet modules. Building on our previous study, “Buyer Aware: Three new failure modes in TOPCon modules absent from PERC technology”, this work delves deeper into corrosion-induced degradation in TOPCon minimodules encapsulated with ethylene-vinyl acetate copolymer (EVA) and three commercially sourced polyolefin elastomers (POE-A, -B, and -C). After 1000 h of damp-heat exposure (85 °C, 85 % RH), the module with EVA showed a ∼11 % rel drop in P max , mainly attributed to a 50 % rel rise in series resistance (R s ). Spectroscopic analysis suggests that acetic acid released from EVA hydrolysis reacts with solder-flux residues, promoting front metal corrosion at the cell contacts. POE-A and POE-B modules degraded by only 6–10 % rel , neither produced measurable organic acids, and POE-A's antioxidant package appears to inhibit polymer oxidation, confining the residual loss to isolated pre-lamination contaminants. In contrast, POE-C suffered a 55 % rel in P max . Chemical probing reveals a potential cascade of mutually reinforcing reactions that generate a highly acidic micro-environment comprising: (i) carboxylic acids from POE oxidation, (ii) azelaic acid liberated from soldering flux, and (iii) benzoic and phenolic by-products from the ultraviolet (UV) absorber breakdown. This corrosive cocktail potentially accelerates the electrochemical attack on the front cell metallisation, driving a drastic R s increase and catastrophic module failure. The study highlights the pivotal influence of encapsulant formulation, antioxidant, UV absorber chemistry and manufacturing cleanliness on the long-term reliability of TOPCon modules. • EVA modules: ∼11 % rel P max loss due to R s increase caused by acetic acid reacting with soldering flux and corroding contac. • POE-A/B modules: 6-10% rel P max loss due to pre-lamination contaminants reacting with moisture; No acids in POE. • POE-C module: 55% rel P max loss caused by carboxylic acids due to UV absorber breakdown in POE and azelaic acid from flux.
No takes yet. Share an insight, caveat, or question.
Sen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: