This is the authors' abstract. We don't add key points for this paper.
The effect of O/Zn flux ratio on the crystalline quality of ZnO films grown at 700°C by plasma-assisted molecular beam epitaxy was investigated. Zinc beam flux ( F Zn ) was varied from 2.2≤ F Zn ≤8.3 Å/s with an O 2 flow rate of 3 sccm and RF power of 300 W. The surface morphology of the ZnO layers strongly depended on F Zn . ZnO epilayers grown under stoichiometric flux conditions (i.e., F Zn =5.1 Å/s) had high crystalline quality, as was confirmed by using X-ray diffraction, photoluminescence (PL), and Hall-effect measurements: the full width at half maximum (FWHM) of a skew symmetric (1010) X-ray rocking curve was 720 arcsec; the dominant neutral donor bound exciton emission intensity in the PL spectra became maximum with the narrowest FWHM; the electron mobility was a maximum of 130 cm 2 V -1 s -1 ; and a residual carrier concentration of 1.2 × 10 17 cm -3 was achieved. We demonstrated that stoichiometric ZnO films have the lowest dislocation density and the highest electron mobility compared with ZnO films grown under nonstoichiometric flux conditions.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Kato et al. (2003) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: