Answers are grounded in this paper and cite their sources.
Experimental and numerical investigation reveals transient heat transfer dynamics across offset plates in a radiation-heated channel, highlighting faster thermal stabilization at higher flow rates.
Experimental and numerical investigations were conducted on the transient behavior, following power activation, of laminar flow forced-convection heat transfer for air traversing offset plates within a two-parallel-plate channel heated by radiation, which is pertinent to integrated photovoltaic/thermal air heater solar collector applications. In the numerical simulation, a two-dimensional transient model was used, and the temperature boundary conditions were determined at each time step. The experimental data showed a range of 990 to 4050 seconds for the time to reach equilibrium, depending on Re. It also revealed that the heat-transfer mechanism undergoes dynamic changes, characterized by a minimum in the convective heat-transfer coefficient, before stabilizing at a steady state, a critical factor in understanding the system's heat-transfer efficiency. Experimental and numerical findings indicated that offset plates attain steady-state temperatures that depend on plate location, ranging from 40°C to 100°C, with equilibrium times varying from 4050 seconds at Re=650 to 990 seconds at Re=2550. The transient Nusselt number initially peaks during the transition period, then stabilizes between 5 and 15 seconds, indicating that the heat-transfer mechanism undergoes dynamic changes that stabilize more quickly at higher Reynolds numbers. The model's velocity field and isothermal contour maps provide a physical explanation of the experimental results.
No takes yet. Share an insight, caveat, or question.
Ali et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: