Answers are grounded in this paper and cite their sources.
The authors describe a plasma ashing system where a stationary jet of hot, activated gases removes photoresist from a scanning wafer. The jet is created by a reactant stream flowing through a 2.45GHz surface wave discharge in a 6mm quartz tube. For O2∕N2 plasmas in the medium pressure range from 20to100Torr, a luminous plasma jet emerges from the end of the discharge tube that transports both heat and reactive species to the wafer. A single scan results in a Gaussian track profile with a standard deviation of 7mm for the source-to-substrate distance of 9mm. A simple model of the ashing process, which assumes a thermally activated ash rate and Gaussian distributions for both power density and reactant flux, unifies the dependence of effective ash rate on the substrate temperature and scan speed at a constant power. The best fit activation energy at 2.5kW is 0.23eV, about half of the value found in conventional downstream ashing, implying that diffusion plays a significant role in limiting the ash rate. The peak thermal power density in a 2.5kW jet at 80Torr is 160W∕cm2, resulting in an effective instantaneous ash rate of 2.5mm∕min for a scan speed of 70cm∕s and 200°C chuck temperature. This implies that the time to clear a 1.2μm thick resist coating from a 300mm wafer is 18s.
No takes yet. Share an insight, caveat, or question.
Bhargava et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: