Answers are grounded in this paper and cite their sources.
In this work, bimodal Cu nano-inks composed of two different sizes of Cu nanoparticles (NPs) (40 and 100 nm in diameter) were successfully sintered with a multi-pulse flashlight sintering technique. Bimodal Cu nano-inks were fabricated and printed with various mixing ratios and subsequently sintered by a flash light sintering method. The effects of the flashlight sintering conditions, including irradiation energy and pulse number, were investigated to optimize the sintering conditions. A detailed mechanism of the sintering of bimodal Cu nano-ink was also studied via real-time resistance measurement during the sintering process. The sintered Cu nano-ink films were characterized using x-ray photoelectron spectroscopy and scanning electron microscopy. From these results, it was found that the optimal ratio of 40–100 nm NPs was found to be 25:75 wt%, and the optimal multi-pulse flash light sintering condition (irradiation energy: 6 J cm −2 , and pulse duration: 1 ms, off-time: 4 ms, and pulse number: 5) was found. The optimally sintered Cu nano-ink film exhibited the lowest resistivity of 5.68 μ Ω cm and 5B adhesion level.
No takes yet. Share an insight, caveat, or question.
Yu et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: