Answers are grounded in this paper and cite their sources.
An attempt is made to determine the effect of lateral surface curvature upon the turbulent boundary layer of a circular cylinder immersed in a compressible fluid with its axis parallel to the direction of flow. The calculation is carried out by means of the momentum theorem with the assumptions tha t the velocity profile (1/7-power law) and an empirical relation that puts the wall shear stress inversely proportional to the fourth root of the boundary-layer thickness (Blasius Law) are unaffected by the curvature. Further assumptions are constancy of static pressure and total energy. On this basis the following results are obtained: Full thickness and displacement thickness are less than on the flat plate, while momentum thickness and local and mean friction coefficients are higher. For the displacement thickness the deviation from the flat plate value may become appreciable already if the ratio of full boundary-layer thickness to cylinder radius is less than 0.1 and for the full thickness if this ratio is somewhat above 0.1. The friction coefficients on the other side are rather insensitive to curvature and deviate appreciably only if the ratio becomes as large as one. Compressibility in general somewhat increases the effect of curvature except for the displacement thickness where a slight decrease is found. The reliability of the basic assumptions and effects of their variation are discussed.
No takes yet. Share an insight, caveat, or question.
Hans U. Eckert (1952) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: