Answers are grounded in this paper and cite their sources.
The growing demand for sustainable alternatives to petroleum-derived materials in packaging, electronics, and filtration highlights the need for robust and eco-friendly fabrication methods for cellulose-based films. However, cellulose nanopapers with improved mechanical performance are commonly produced using chemical modification or energy-intensive processing, which may limit their scalability and environmental sustainability. In this study, bacterial cellulose (BC) nanopapers with enhanced strength and toughness were fabricated from a non-oxidized BC powder suspension using ultrasonication followed by boiling-water (BW) treatment. BC powder was prepared from wet BC pellicles hydrated in distilled water, sonicated, boiled at 100 °C for 2, 4, and 5 h, and oven-dried. Nanopapers were then fabricated by resuspending the treated BC powder in water followed by casting. The results showed that BW treatment simultaneously improved tensile strength and toughness. The 5-h boiling treatment results in increased tensile strength, tensile modulus, elongation at break, and toughness by 89% (81.9 MPa), 261% (1,383.5 MPa), 26% (14.8%), and 148% (6.7 MJ/m 3 ), respectively, compared with the non-boiled nanopaper. The BW-treated nanopaper also exhibited a broader plastic deformation region and fewer pores. These findings demonstrate that boiling-water treatment of an ultrasonicated, non-oxidized BC powder suspension provides a simple, chemical-free, and pressure-free route for producing BC nanopapers with enhanced mechanical performance.
No takes yet. Share an insight, caveat, or question.
Rahmadiawan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: