Answers are grounded in this paper and cite their sources.
We present a simple and shape-controllable method to tune the surface energy and tilting angle of nanohairy structures using broad ion beam irradiation. First, the vertical nanohair arrays made of ultraviolet (UV)-curable polyurethane acrylate (PUA) material were prepared by replica molding. Subsequently, the nanohairs were bent to a wide range of angles from 0 (vertical) to 75° (stooped hairs) by the oblique broad Ar ion beam. The surface energy was tuned with normal oxygen (O2) ion beam irradiation together with aging effect (47.1 to 71.9 mJ m−2). It was observed that the shear adhesion strength was significantly increased from 25.2 to 58.1 N cm−2 on the hydrophilic test surface and from 22.8 to 45.7 N cm−2 on the hydrophobic test surface, respectively, with the variation of surface energy from 47.1 to 71.9 mJ m−2. In addition, the shear adhesion strength was increased from 58.1 to 124.1 N cm−2 and from 45.7 to 110.6 N cm−2 on hydrophilic and hydrophobic test surfaces, respectively, as the tilting angle was varied from 0 to 75° at the highest surface energy of 71.9 mJ m−2. The measured adhesion data were compared with the theoretical adhesion forces based on Johnson–Kendall–Roberts (JKR), modified-JKR, peel zone (PZ), and Kendall peeling models, suggesting that the contact state of nanohairs is a mixture of tip and side contacts.
No takes yet. Share an insight, caveat, or question.
Rahmawan et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: