Answers are grounded in this paper and cite their sources.
Air layer drag reduction (ALDR) technology is known to offer energy-saving advantages in maritime applications. In this study, drag reduction mechanisms, for a ship model with and without air holes, were examined through experimental and numerical investigations. The analysis also encompassed the influence of ship draft and air injection rate (Qa) on drag reduction (DR). Notably, DR remained stable at 25% for Qa = 0.556 × 10−3 m³/s but decreased significantly by approximately 15% at Qa = 0.361 × 10−3 m³/s. Drag reduction attributable to frictional resistance (Rf) exceeded that from pressure resistance (Rp). This disparity arose because increased wave height (H) in the air-injected model, relative to its non-injected counterpart, increased wave resistance (Rw), consequently elevating Rp. Observations at the ship bottom indicated substantial air layer coverage, with thickness peaking at 14 mm and reaching a minimum of 3 mm.
No takes yet. Share an insight, caveat, or question.
Ke et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: