Answers are grounded in this paper and cite their sources.
We report on improving the performance of pin‐type a‐Si:H/a‐SiGe:H/µc‐Si:H triple‐junction solar cells and corresponding single‐junction solar cells in this paper. Based on wet‐etching sputtered aluminum‐doped zinc oxide (ZnO:Al) substrates with optimized surface morphologies and photo‐electrical material properties, after adjusting individual single‐junction solar cells utilized in triple‐junction solar cells with various optimization techniques, we pay close attention to the optimization of tunnel recombination junctions (TRJs). By means of the optimization of individual a‐Si:H/a‐SiGe:H and a‐SiGe:H/µc‐Si:H double‐junction solar cells, we compensated for the open circuit voltage (Voc) loss at the a‐Si:H/a‐SiGe:H TRJ by adopting a p‐type µc‐Si:H layer with a low activation energy. By combining the optimized single‐junction solar cells and top/middle, middle/bottom TRJs with little electrical losses, an initial efficiency of 15.06% was achieved for pin‐type a‐Si:H/a‐SiGe:H/µc‐Si:H triple‐junction solar cells.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: