Answers are grounded in this paper and cite their sources.
RATIONALE: This paper presents an in-depth evaluation of the laser diode thermal desorption (LDTD) device interfaced to a mass spectrometer and identifies the critical method parameters to evaluate when developing a new procedure. METHODS: Samples were solvent extracted and spotted in a 96-well plate. In the case of biological fluids, hydrolysis followed by solid phase extraction is required. The solvent in the 96-well plate is evaporated, followed by mass spectrometric analysis (MS) with atmospheric pressure chemical ionization (APCI). Where applicable, the instrument is operated in a data-dependent mode, with a full-scan mass spectrum followed by MS/MS spectra with a total runtime of 18 s per well. RESULTS: Five key experiments (sample dilution, gas flow, laser ramp, ion saturation/ion suppression, and signal enhancement) were evaluated as critical parameters that could potentially be encountered in method development, and practical solutions are proposed. CONCLUSIONS: Interfacing LDTD with a mass spectrometer allows for rapid screening for many analytes in a wide range of samples, with either minimal or complex sample preparation. Addressing all critical method parameters can aid in creating a sensitive and robust procedure.
No takes yet. Share an insight, caveat, or question.
Rochon et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: