Answers are grounded in this paper and cite their sources.
In this research, a corncob-derived solid base catalyst was successfully prepared through a 3-step activation process: hydrothermal pre-carbonization-impregnation-calcination. Initially, corncobs were transformed into hydro-char via hydrothermal carbonization; this was followed by the impregnation and calcination process. During the impregnation process, NaOH, as an activation agent, was used to generate alkali properties; calcination was then performed to complete the functionalization of alkali properties to the particles. The synthesized catalysts were characterized by using Energy Dispersive X-Ray Scanning Electron Microscope (EDS-SEM), X-Ray Diffraction (XRD), Fourier Transform Infrared (analyze) Spectroscopy and Thermogravimetric Analysis (TGA). The performance of the catalyst was investigated in the transesterification reaction from the purified palm oil (Acid value = 0.51 mg KOH/gram oil). The investigation revealed that the best result in biodiesel production was achieved under the reaction condition of 4-wt% catalyst loading, and a molar ratio of methanol/oil of 12:1, at 60 °C for 60 min with conversion at 82.00 ± 2.3%. The synthesized solid base catalyst had a promising reusability. No significant loss in catalytic activity was observed with 97% retained after two cycles. Furthermore, the catalyst was able to retain 65% of its catalytic activity after four cycles. These findings indicate the strong potential of corncob-derived carbon as a solid base catalyst, which could be efficiently employed in biodiesel production.
No takes yet. Share an insight, caveat, or question.
Mardina et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: