Answers are grounded in this paper and cite their sources.
Optimizing the fuel phase in bulk emulsions for open-pit and underground mining enhances safety and efficiency. In this study, gas-to-liquid (GTL) fuels have been studied due to their low viscosity readily biodegradable nature, and low odor and toxicity. Single- and double-salt emulsions were prepared with two GTL fuels, G85 and G100, different in boiling range but identical in hydrocarbon composition targeting at 95/5%m/m oxidizer/fuel (O/F) ratio. GTL emulsions were compared to a standard 94/6%m/m O/F ratio emulsion prepared with White Oil, as well as common polyisobutylene succinic anhydride (PIBSA) emulsifiers. Viscosity and microscopy data demonstrated good emulsification and stability, even with reduced fuel content (5% vs. 6%m/m). Decrease in density with time during chemical gassing with NaNO2 was also evaluated, pointing to differences between fuel phases, which was ascribed to the highly paraffinic nature of the fuel, as well as the varying viscosities. Further, it was demonstrated that the reduce fuel content did not impact velocity of detonation (VoD) significantly, showing values around 4500 m/s in unconfined tests in plastic pipes with two diameters. This work demonstrated that GTL fuel phases offer advantages over mineral oils while maintaining emulsion stability and performance, offering economic and safety benefits.
No takes yet. Share an insight, caveat, or question.
Rivera-Torrente et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: